Small Monstera Leaf

US$7.50 ex. Vat

Handmade silicone mould for a Small Monstera Leaf flatback. Ideal for making necklaces with resin, polymer clay or concrete. You can include your clients’ elements or inclusions such as breastmilk, lock of hair, umbilical cord and placenta or cremation ashes.

Scroll down for full product info.


Small Monstera Leaf cabochon mould/mold with hole. Please note, these are around 28mm high and 26mm wide, and are designed for use with a pinch bail or a large jump ring like ours here. They come pre-engraved which means you can see lines on the crystal points defining them!

Please note: You may find the tiny cylinder of silicone that forms the hole will often come out when you remove your cast resin, but a small amount should still remain and you can use that to drill a hole with a 1mm drill bit. If you want the hole larger, use increasingly larger drill bits . Please read our full Terms and Conditions and FAQ page before ordering.

Setting a Small Monstera Leaf

They are perfect for use with a pinch bail or a large jump ring like ours here. Pair that with a necklace chain or perhaps a hemp cord. They make cute earrings if you make two (moulds sold individually) or dangle charms. You can even use them to decorate phone cases.

Alternatively you can wire wrap your heart using this tutorial for wrapping a heart pendant with a hole as inspiration

Using Silicone Moulds

Because they are made from water-clear silicone, our moulds (molds) they are ideal for all types of resin including UV curing resin. No need for polishing or sanding. We use a strong but flexible high quality silicone and each mould is hand made and checked.

Simply mix your resin with colours, sparkles, flowers or your clients’ elements or inclusions like breastmilk, lock of hair, umbilical cord and placenta or cremation ashes. Then add to the mould and cure in the usual way. Or you can add your resin to the mould before adding elements.

If working with UV resin we recommend you work in layers to achieve beautiful depths of colour.

These moulds are suitable for use with resin (UV resin, EcoResin, epoxy resin or polyester resin), concrete, polymer clay (air drying, heat curing such as Premo and Sculpey). We recommend removing the polymer clay from the mould before baking if not using air drying clay although they can be heated up to 130°C. Although we use a food-safe silicone, we don’t recommend these moulds for use with food due to the manufacturing process.

Mould Life and Care

These moulds are sold for semi-permanent use and will degrade with use. This is normal and not classed as a fault. Please see our mould care information for more info. The life of your moulds will depend on the material used, the number of uses, how gentle you are using it, good storage, careful washing and environmental factors.

Test Cast

It is very important you do a test cast with each mould to check for imperfections, to remove any dust attained during transit and to make sure you are comfortable using the mould before making any jewellery. We advise you use UV resin for this and coat the depression in resin before curing, removing and making a visual check. If there is a problem with the test cast please get in touch within 7 days of receipt.

Settings and Findings

We recommend that medium heart resin cabochons are fitted into place with a crown point setting or serrated bezel but you can also glue them onto shallow bezel cups or glue on a bail (necklace setting). Due to differences in manufacturing processes, we cannot guarantee a perfect fit with any specific setting, many heart settings are different shapes. If you are unsure please order a single mould to test, make a test cast cabochon (see above) then test it in the setting. To help you remove it from the bezel cup, place a length of dental floss over the bezel cup first before pushing in the cabochon.

Contact Us

If you have any questions please email us on or get in touch on our Facebook page Keepsaker Supplies (click here).

This page contains affiliate links meaning we may receive a small amount of commission based on your purchases with no extra cost to yourself.

Additional information

Weight 3 g
silicone type

water clear

cab size

18mm heart




There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…