14x10mm Faceted Teardrop Mould Duo cabochons (two depressions in each mould to fill). Please read our full Terms and Conditions and FAQ page before ordering.
Setting a 14x10mm Faceted Teardrop Cabochon
They are perfect for use with a prong silver necklace setting like this. You’ll need a silver necklace chain like this for your customer too. This will give you everything you need for a beautiful 6x4mm teardrop necklace for your clients.
Or you could make a solid sterling silver ring using this sterling silver teardrop ring setting
They are perfect for use with a 14x10mm silver crown teardrop setting. You’ll need 6mm solid silver split rings (or you can solder on regular jump rings) and you can include a silver necklace chain for your customer or you can attach an 11mm silver lobster clasps to attach it as a charm to Thomas Sabo style bracelets. This will give you everything you need for a beautiful 14x10mm teardrop necklace for your clients.
Using Silicone Moulds
Because they are made from water-clear silicone, our moulds (molds) they are ideal for all types of resin including UV curing resin. No need for polishing or sanding. We use a strong but flexible high quality silicone and each mould is hand made and checked.
Simply mix your resin with colours, sparkles, flowers or your clients’ elements or inclusions like breastmilk, lock of hair, umbilical cord and placenta or cremation ashes. Then add to the mould and cure in the usual way. Or you can add your resin to the mould before adding elements.
If working with UV resin we recommend you work in layers to achieve beautiful depths of colour.
These moulds are suitable for use with resin (UV resin, EcoResin, epoxy resin or polyester resin), concrete, polymer clay (air drying, heat curing such as Premo and Sculpey). We recommend removing the polymer clay from the mould before baking if not using air drying clay although they can be heated up to 130°C. Although we use a food-safe silicone, we don’t recommend these moulds for use with food due to the manufacturing process.
Mould Life and Care
These moulds are sold for semi-permanent use and will degrade with use. This is normal and not classed as a fault. Please see our mould care information for more info. The life of your moulds will depend on the material used, the number of uses, how gentle you are using it, good storage, careful washing and environmental factors.
It is very important you do a test cast with each mould to check for imperfections, to remove any dust attained during transit and to make sure you are comfortable using the mould before making any jewellery. We advise you use UV resin for this and coat the depression in resin before curing, removing and making a visual check. If there is a problem with the test cast please get in touch within 7 days of receipt.
Settings and Findings
We recommend that resin cabochons are glued into place and ideally protected with a rubover bezel. You can use any setting with a 14x10mm teardrop mould shaped depression and due to differences in manufacturing processes, we cannot guarantee a perfect fit. If you are unsure please order a single mould to test, make a test cast cabochon (see above) then test it in the bezel cup. To help you remove it from the bezel cup, place a length of dental floss over the bezel cup first before pushing in the cabochon.
If you have any questions please email us on firstname.lastname@example.org or get in touch on our Facebook page Keepsaker Supplies (click here).
This page contains affiliate links meaning we may receive a small amount of commission based on your purchases with no extra cost to yourself.
madcatsalert (verified owner) –
As always a perfect moud. Crystal clear and very easy to use results are stunning, i set the finished piece in one of the matching silver pendants(listed above). My sister was so pleased she got emotional when i gave it to her . Absolutely stunning. Thank you.
eleesha1992 (verified owner) –
Looks lovely but haven’t had chance to use yet but mold brilliantly clear