Honeycomb Bead Mould Masters (mold) pack of 10 for making bead moulds for Pandora style bracelets. Keepsaker Supplies mould masters are for personal use only and not for resale or for selling moulds please. Please read our full Terms and Conditions and FAQ page before ordering.
Making Bead and Sphere Moulds
Honeycomb Bead Mould Masters Dimensions
Internal hole diameter: 5mm
Making Silicone Moulds
Please use a pourable liquid silicone rather than a putty. You can use opaque, translucent or water-clear silicone for use with epoxy resin. To use UV resin you will need to use water-clear silicone so the light can penetrate. We recommend SORTA-Clear by Smooth-On in the USA, we have trialled other silicones but they don’t have the strength and can rip. A shore hardness (sh) of 18 or 20 is ideal but for soft moulds you can use sh15.
Video coming soon of how Nikki makes moulds
How to Use A Charm Bead Mould
You can read our full blog here on making a lock of hair and rose petal charm bead with all the links for the products you’ll need. Here’s the YouTube tutorial video
If working with UV resin we recommend you work in layers to achieve beautiful depths of colour.
These moulds are suitable for use with resin (UV resin, EcoResin, epoxy resin or polyester resin), concrete, polymer clay (air drying, heat curing such as Premo and Sculpey). We recommend removing the polymer clay from the mould before baking if not using air drying clay although they can be heated up to 130°C. To remove unset clay without warping it, we recommend cutting the mould vertically around halfway down. Although we use a food-safe silicone, we don’t recommend these moulds for use with food due to the manufacturing process.
Honeycomb Bead Mould Masters Life and Care
These moulds are sold for semi-permanent use and will degrade with use. This is normal and not classed as a fault. Please see our mould care information for more info. The life of your moulds will depend on the material used, the number of uses, how gentle you are using it, good storage, careful washing and environmental factors. The mould masters should be wiped gently after each use with a damp cloth, dried and polished before use with a lint-free cloth.
It is very important you do a test cast with each mould to check for imperfections, to remove any dust attained during transit and to make sure you are comfortable using the mould before making any jewellery. We advise you use UV resin for this and coat the inside of the mould in resin before curing, removing and making a visual check. If there is a problem with the test cast please get in touch within 7 days of receipt.
Settings and Findings
We recommend that you do not overfill the mould but allow a little extra resin in the pouring spout for bubbles to rise and to provide a grip to remove the cast. You can usually trim the excess before sanding, dome with resin if required. Large Bead Mould Masters are good for our glue-in heart inserts and our glue-in thin bead inserts.
The charm bead cores are never going to be 100% central as they’re made from glass/precious stone masters that are handmade. They may not be totally uniform, some may be up to 1mm larger or smaller in any direction than our guidelines. Whilst making charm beads at Tree of Opals over five years, I’ve literally never had a complaint about a core being off-centre from a customer, and these are the moulds we use for dozens of orders a wee in that business. If you require a guarantee of perfection please order from another supplier who can guarantee it, sorry.
Ideal for use with our solid silver large charm bead inserts!
If you have any questions please email us on email@example.com or get in touch on our Facebook page Keepsaker Supplies (click here).
This page contains affiliate links meaning we may receive a small amount of commission based on your purchases with no extra cost to yourself.