12mm small square cabochon mould/mold pairs (two depressions in each mould to fill). Please read our full Terms and Conditions and FAQ page before ordering.
12mm Square Cabochon Settings
They are perfect for use with a square 12mm silver crown setting. You’ll need 6mm solid silver split rings (or you can solder on regular jump rings) and you can include a silver necklace chain for your customer. This will give you everything you need for a beautiful 12mm square necklace for your clients.
They are also great for use with a prong silver necklace setting. You’ll need a silver necklace chain like this for your customer too. This will give you everything you need for a beautiful 12mm diamond shaped necklace for your clients.
Or you could make a solid sterling silver ring using this sterling silver claw ring setting(click here) – shorter prongs are best for smaller cabochons like this
They also look great set in a square 12mm crown silver ring setting like this for a dramatic finish!
Using Silicone Moulds
Because they are made from water-clear silicone, our moulds (molds) they are ideal for all types of resin including UV curing resin. No need for polishing or sanding. We use a strong but flexible high quality silicone and each mould is hand made and checked.
Simply mix your resin with colours, sparkles, flowers or your clients’ elements or inclusions like breastmilk, lock of hair, umbilical cord and placenta or cremation ashes. Then add to the mould and cure in the usual way. Or you can add your resin to the mould before adding elements.
If working with UV resin we recommend you work in layers to achieve beautiful depths of colour.
These moulds are suitable for use with resin (UV resin, EcoResin, epoxy resin or polyester resin), concrete, polymer clay (air drying, heat curing such as Premo and Sculpey). We recommend removing the polymer clay from the mould before baking if not using air drying clay although they can be heated up to 130°C. Although we use a food-safe silicone, we don’t recommend these moulds for use with food due to the manufacturing process.
Mould Life and Care
These moulds are sold for semi-permanent use and will degrade with use. This is normal and not classed as a fault. Please see our mould care information for more info. The life of your moulds will depend on the material used, the number of uses, how gentle you are using it, good storage, careful washing and environmental factors.
It is very important you do a test cast with each mould to check for imperfections, to remove any dust attained during transit and to make sure you are comfortable using the mould before making any jewellery. We advise you use UV resin for this and coat the depression in resin before curing, removing and making a visual check. If there is a problem with the test cast please get in touch within 7 days of receipt.
Settings and Findings
We recommend that small square resin cabochons are fitted into place with a crown point setting or serrated bezel but you can also glue them onto shallow bezel cups or glue on a small bail (necklace setting). Due to differences in manufacturing processes, we cannot guarantee a perfect fit with any specific setting, many heart settings are different shapes. If you are unsure please order a single mould to test, make a test cast cabochon (see above) then test it in the setting. To help you remove it from the bezel cup, place a length of dental floss over the bezel cup first before pushing in the cabochon.
If you have any questions please email us on email@example.com or get in touch on our Facebook page Keepsaker Supplies (click here).
This page contains affiliate links meaning we may receive a small amount of commission based on your purchases with no extra cost to yourself.