Kawaii Rainbow Pendant cabochon mould/mold with two attachment holes for making necklace pendants. Please note, these are 29mm high x 60mm wide and 7mm deep, and are designed for use with two large jump rings like ours here. They come pre-engraved which means you can see lines on the rainbow defining the different colour areas! You can pre-colour the different colours (red, orange, yellow, green, blue and purple) using mica powder or our ethical resin sparkle mixes then fill with resin or you can paint your piece afterwards.
Please note: You may find the tiny cylinder of silicone that form the holes will often come out when you remove your cast resin, but a small amount should still remain and you can use that to drill a hole with a 1mm drill bit. If you want the hole larger, use increasingly larger drill bits . Please read our full Terms and Conditions and FAQ page before ordering.
Setting a Kawaii Rainbow Pendant
They are perfect for use with large jump rings like ours here. Pair that with a necklace chain or perhaps a hemp cord.
Alternatively you can wire wrap your Rainbow Pendant each side using this tutorial for wrapping a heart pendant with a hole as inspiration
Using Silicone Moulds
Because they are made from water-clear silicone, our moulds (molds) they are ideal for all types of resin including UV curing resin. No need for polishing or sanding. We use a strong but flexible high quality silicone and each mould is hand made and checked.
Simply mix your resin with colours, sparkles, flowers or your clients’ elements or inclusions like breastmilk, lock of hair, umbilical cord and placenta or cremation ashes. Then add to the mould and cure in the usual way. Or you can add your resin to the mould before adding elements.
If working with UV resin we recommend you work in layers to achieve beautiful depths of colour.
These moulds are suitable for use with resin (UV resin, EcoResin, epoxy resin or polyester resin), concrete, polymer clay (air drying, heat curing such as Premo and Sculpey). We recommend removing the polymer clay from the mould before baking if not using air drying clay although they can be heated up to 130°C. Although we use a food-safe silicone, we don’t recommend these moulds for use with food due to the manufacturing process.
Mould Life and Care
These moulds are sold for semi-permanent use and will degrade with use. This is normal and not classed as a fault. Please see our mould care information for more info. The life of your moulds will depend on the material used, the number of uses, how gentle you are using it, good storage, careful washing and environmental factors.
It is very important you do a test cast with each mould to check for imperfections, to remove any dust attained during transit and to make sure you are comfortable using the mould before making any jewellery. We advise you use UV resin for this and coat the depression in resin before curing, removing and making a visual check. If there is a problem with the test cast please get in touch within 7 days of receipt.
If you have any questions please email us on firstname.lastname@example.org or get in touch on our Facebook page Keepsaker Supplies (click here).
This page contains affiliate links meaning we may receive a small amount of commission based on your purchases with no extra cost to yourself.