7x5mm Mould Duo

(3 customer reviews)

US$13.16 ex. Vat

7X5mm Mould Duo handmade silicone mould with two depressions for 7X5mm cabochons. Ideal for making ring and earring cabochons with resin, polymer clay or concrete. You can include your clients’ elements or inclusions such as breastmilk, lock of hair, umbilical cord and placenta or cremation ashes.

Scroll down for full product info.

Description

7X5mm Mould Duo cabochon mould/mold pairs (two depressions in each mould to fill). Please read our full Terms and Conditions and FAQ page before ordering.

Setting a 7X5mm Cabochon

Or you could make a solid sterling silver ring using this sterling silver prong ring setting (click here) – shorter prongs are best for small cabochons like this

twisted prong ring with breastmilk, umbilical cord and hair 10x8mm oval stone. Argentium 935 anti-tarnish silver. 2.4mm wide handmade twisted wire shank, handmade 15mm prongs 0.8mm wire claws
twisted prong ring with breastmilk, umbilical cord and hair 10x8mm oval stone. Argentium 935 anti-tarnish silver. 2.4mm wide handmade twisted wire shank, handmade 15mm prongs 0.8mm wire claws

They are perfect for use with a 7X5mm silver bracelet setting from Etsy, just make as many resin cabochons as you need and some spares, then set the best in the bracelet

7X5mm Mould Duo bracelet
7X5mm silver bracelet setting on Etsy

Using Silicone Moulds

Because they are made from water-clear silicone, our moulds (molds) they are ideal for all types of resin including UV curing resin. No need for polishing or sanding. We use a strong but flexible high quality silicone and each 7X5mm Mould Duo is hand made and checked.

Simply mix your resin with colours, sparkles, flowers or your clients’ elements or inclusions like breastmilk, lock of hair, umbilical cord and placenta or cremation ashes. Then add to the mould and cure in the usual way. Or you can add your resin to the mould before adding elements.

If working with UV resin we recommend you work in layers to achieve beautiful depths of colour.

These moulds are suitable for use with resin (UV resin, EcoResin, epoxy resin or polyester resin), concrete, polymer clay (air drying, heat curing such as Premo and Sculpey). We recommend removing the polymer clay from the mould before baking if not using air drying clay although they can be heated up to 130°C. Although we use a food-safe silicone, we don’t recommend these moulds for use with food due to the manufacturing process.

Mould Life and Care

These moulds are sold for semi-permanent use and will degrade with use. This is normal and not classed as a fault. Please see our mould care information for more info. The life of your moulds will depend on the material used, the number of uses, how gentle you are using it, good storage, careful washing and environmental factors.

Test Cast

It is very important you do a test cast with each mould to check for imperfections, to remove any dust attained during transit and to make sure you are comfortable using the mould before making any jewellery. We advise you use UV resin for this and coat the depression in resin before curing, removing and making a visual check. If there is a problem with the test cast please get in touch within 7 days of receipt.

7X5mm Mould Duo Settings and Findings

We recommend that resin cabochons are glued into place and ideally protected with a rubover bezel. You can use any setting with an 7X5mm depression and due to differences in manufacturing processes, we cannot guarantee a perfect fit. If you are unsure please order a single mould to test, make a test cast cabochon (see above) then test it in the bezel cup. To help you remove it from the bezel cup, place a length of dental floss over the bezel cup first before pushing in the cabochon.

Contact Us

If you have any questions please email us on keepsakersupplies@gmail.com or get in touch on our Facebook page Keepsaker Supplies (click here).

This page contains affiliate links meaning we may receive a small amount of commission based on your purchases with no extra cost to yourself.

Additional information

silicone type

water clear

cab size

10x8mm

depth/thickness

4mm

depressions

2

3 reviews for 7x5mm Mould Duo

  1. realmofresin1 (verified owner)

    Had looked everywhere for a cab mould this size. Some were very near to the 7×5 but never quite fit the setting right. I stumbled across this website and they weren’t in stock but after contacting keepsaker supplies, they let me know when it would be back in stock and once it was I ordered. Always great customer service

  2. alays20 (verified owner)

    Nice mould creates beautifully shiny cabs! Love the different sizes available on the moulds. So happy!

  3. Tracie Nall (verified owner)

    Bought other moulds from another supplier before I found these. I certainly will not be going anywhere else for my molds,You can order with confidence from Keppsaker supplies,

Only logged in customers who have purchased this product may leave a review.