10mm Lens Cabochon Mould Duo

US$9.50 ex. Vat

Handmade silicone mould with two depressions for 10mm Lens Cabochon Mould Duo. Please note, lens shaped cabs are deeper than regular cabs and will sit higher in your bezel setting.

Scroll down for full product info.

Description

10mm Lens Cabochon Mould Duo or pairs (two depressions in each mould to fill) lens shaped (high/deep fill). Ideal for making ring and earring cabochons with resin, polymer clay or concrete. You can include your clients’ elements or inclusions such as breastmilk, lock of hair, umbilical cord and placenta or cremation ashes.

They may be more prone to getting knocked than our regular cabs and we would recommend great care for keepsake and memorial jewellery. Please read our full Terms and Conditions and FAQ page before ordering.

Recommended Setting

A 10mm round claw setting silver ring is an example of a perfect for setting these cabochons. Just make sure you keep the edges neat and use a bezel rocker to push down the claws once you’re happy.

They are perfect for use with this 10mm round silver crown setting . You’ll need 6mm solid silver split rings (or you can solder on regular jump rings) and you can include a silver necklace chain for your customer. This will give you everything you need for a beautiful 10mm necklace for your clients.

Using a 10mm Lens Cabochon Mould Duo

Because they are made from water-clear silicone, our moulds (molds) they are ideal for all types of resin including UV curing resin. No need for polishing or sanding. We use a strong but flexible high quality silicone and each mould is hand made and checked.

Simply mix your resin with colours, sparkles, flowers or your clients’ elements or inclusions like breastmilk, lock of hair, umbilical cord and placenta or cremation ashes. Then add to the mould and cure in the usual way. Or you can add your resin to the mould before adding elements.

If working with UV resin we recommend you work in layers to achieve beautiful depths of colour.

These moulds are suitable for use with resin (UV resin, EcoResin, epoxy resin or polyester resin), concrete, polymer clay (air drying, heat curing such as Premo and Sculpey). We recommend removing the polymer clay from the mould before baking if not using air drying clay although they can be heated up to 130°C. Although we use a food-safe silicone, we don’t recommend these moulds for use with food due to the manufacturing process.

Mould Life and Care

These moulds are sold for semi-permanent use and will degrade with use. This is normal and not classed as a fault. Please see our mould care information for more info. The life of your moulds will depend on the material used, the number of uses, how gentle you are using it, good storage, careful washing and environmental factors.

Test Cast

It is very important you do a test cast with each mould to check for imperfections, to remove any dust attained during transit and to make sure you are comfortable using the mould before making any jewellery. We advise you use UV resin for this and coat the depression in resin before curing, removing and making a visual check. If there is a problem with the test cast please get in touch within 7 days of receipt.

Settings and Findings

We recommend that resin cabochons are glued into place and ideally protected with a rubover bezel. You can use any setting with a 10mm depression with a 10mm Lens Cabochon Mould Duo and due to differences in manufacturing processes, we cannot guarantee a perfect fit. If you are unsure please order a single mould to test, make a test cast cabochon (see above) then test it in the bezel cup. To help you remove it from the bezel cup, place a length of dental floss over the bezel cup first before pushing in the cabochon.

Contact Us

If you have any questions please email us on keepsakersupplies@gmail.com or get in touch on our Facebook page Keepsaker Supplies (click here).

This page contains affiliate links meaning we may receive a small amount of commission based on your purchases with no extra cost to yourself.

Additional information

Weight 6 g
silicone type

water clear

cab size

10x8mm

depressions

2

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.