10mm Cushion Mould Duo

US$10.00 ex. Vat

Handmade silicone mould with two depressions for 10mm puffy square cabochon duo – a pair of flatbacks can be made with each mould. Ideal for making necklace cabochons with resin, polymer clay or concrete. You can include your clients’ elements or inclusions such as breastmilk, lock of hair, umbilical cord and placenta or cremation ashes.

Scroll down for full product info.

Description

10mm Cushion Mould Duo or puffy square mould for cabochons pairs (two depressions in each mould to fill). Please read our full Terms and Conditions and FAQ page before ordering.

10mm Cushion Mould Duo Settings

They are perfect for use with a Cushion Necklace Setting. You’ll need a silver necklace chain for your customer. This will give you everything you need for a beautiful 10mm cushion necklace for your clients.

cushion cremation ashes necklace with cremation ashes in clear resin, solid sterling silver setting shown with trace chain
cushion cremation ashes necklace with cremation ashes in clear resin, solid sterling silver setting shown with trace chain

They are also great for use with a prong silver necklace setting

oval silver necklace setting
oval silver necklace setting by GoldstoneLtd on Etsy (click here)

Or you could make a solid sterling silver ring using this sterling silver claw ring setting(click here) – shorter prongs are best for smaller cabochons like this

twisted prong ring back view with breastmilk, umbilical cord and hair 10x8mm oval stone. Argentium 935 anti-tarnish silver. 2.4mm wide handmade twisted wire shank, handmade 15mm prongs 0.8mm wire claws
twisted prong ring back view. Argentium 935 anti-tarnish silver. 2.4mm wide handmade twisted wire shank, handmade 15mm prongs 0.8mm wire claws

Using Silicone Moulds

Because they are made from water-clear silicone, our moulds (molds) they are ideal for all types of resin including UV curing resin. No need for polishing or sanding. We use a strong but flexible high quality silicone and each mould is hand made and checked.

Simply mix your resin with colours, sparkles, flowers or your clients’ elements or inclusions like breastmilk, lock of hair, umbilical cord and placenta or cremation ashes. Then add to the mould and cure in the usual way. Or you can add your resin to the mould before adding elements.

If working with UV resin we recommend you work in layers to achieve beautiful depths of colour.

These moulds are suitable for use with resin (UV resin, EcoResin, epoxy resin or polyester resin), concrete, polymer clay (air drying, heat curing such as Premo and Sculpey). We recommend removing the polymer clay from the mould before baking if not using air drying clay although they can be heated up to 130°C. Although we use a food-safe silicone, we don’t recommend these moulds for use with food due to the manufacturing process.

10mm Cushion Mould Duo Life and Care

These moulds are sold for semi-permanent use and will degrade with use. This is normal and not classed as a fault. Please see our mould care information for more info. The life of your moulds will depend on the material used, the number of uses, how gentle you are using it, good storage, careful washing and environmental factors.

Test Cast

It is very important you do a test cast with each mould to check for imperfections, to remove any dust attained during transit and to make sure you are comfortable using the mould before making any jewellery. We advise you use UV resin for this and coat the depression in resin before curing, removing and making a visual check. If there is a problem with the test cast please get in touch within 7 days of receipt.

Settings and Findings

We recommend that small 10mm Cushion Mould Duo resin cabochons are fitted into place with a crown point setting or serrated bezel but you can also glue them onto shallow bezel cups or glue on a small bail (necklace setting). Due to differences in manufacturing processes, we cannot guarantee a perfect fit with any specific setting, many heart settings are different shapes. If you are unsure please order a single mould to test, make a test cast cabochon (see above) then test it in the setting. To help you remove it from the bezel cup, place a length of dental floss over the bezel cup first before pushing in the cabochon.

Please note, these moulds are fairly deep and you my wish to only 2/3 fill them if using with certain settings such as the ZDP/QFM findings.

Contact Us

If you have any questions please email us on keepsakersupplies@gmail.com or get in touch on our Facebook page Keepsaker Supplies (click here).

This page contains affiliate links meaning we may receive a small amount of commission based on your purchases with no extra cost to yourself.

Additional information

silicone type

water clear

cab size

10mm square

depressions

2

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…